top of page

Group

Public·48 members

Where To Buy Washing Machine Belt !!INSTALL!!



Fortunately, replacing a washing machine belt is not that complicated once you know how to access the area where the belt is located. While the disassembly procedure will differ depending on the washer model, here are some general steps you can follow if you need to replace a broken belt on a top-load washer or a front-load washer:




where to buy washing machine belt



Washer main drive belt. This belt is located under the washing machine and is used to drive the splutch pulley. It goes around the motor & splutch pulleys. Worn or broken drive belt can cause spin or washplate problems.


At some point, every washing machine will need a new belt. Though it may seem like a small and insignificant part, the belt plays a critical role in the function of the washing machine. The belt is what helps to rotate the drum, and without it, the machine would not be able to properly clean clothes. Not all washers have belts though, so this is a general guide that covers belt replacement on most washers.


Replacing a worn or damaged belt is relatively simple and can be done fairly inexpensively. However, if the belt is not replaced in a timely manner, it can cause further damage to the machine, which can be much more costly to repair.


Washing machine belts are manufactured to be especially durable and long lasting. Yet problems tend to ensue when the drum is physically unable to turn. This scenario is often caused by a sock or other small article of clothing that has become wedged in between the drum and its housing, thus preventing the drum from spinning. Similarly, if the machine has been overloaded, the drum may not be able to spin correctly.


The first sign that your belt may have been damaged is the smell of burning rubber. This indicates that the belt has suffered as the result of a stuck tub. To perform a visual inspection of your belt, you will first need to tilt the washing machine backwards. Use a couple of bricks or small paint cans to prop up the front edge of the washer. This will allow you to easily see the belt, as well as its motor assembly.


The spinning of a washing machine drum requires power from a motor located in the back of the unit. In order for the motor to make the drum spin, the two components also require some form of connection. In many washing machines, this connector comes in the form of a belt, which wraps around both the motor and the drum and makes the drum spin when the motor runs. Like any component, a washing machine belt can wear out and need to be replaced..


A few different issues may indicate a problem with the belt in a washing machine. Two main issues include the drum not turning when the washing machine is in a wash cycle or a smell of burning rubber coming from the unit when the washer is in use. Other possible indicators of a belt issue in a washing machine include squealing sounds when the machine runs or a drum that runs some of the time but has a tendency to get stuck at times during the wash cycle.


Just because you experience issues that indicate that the belt on a washing machine needs repair doesn't necessarily mean the belt requires replacement. A washing machine belt may also simply slip from the track on either the drum or the motor. To check the belt on a washing machine, unplug the washing machine from the wall and remove the back cover from the unit, which is generally held in place with screws. If the belt doesn't sit in the tracks on the drum or motor, push the belt back into place.


If the belt in the washing machine is not out of place on the track, you should check the belt for damage. If you find noticeable damage, such as holes, tears or fraying on the belt, you shouldn't attempt repair but instead you should replace the belt as soon as possible. It's not advisable to continue use of the washing machine, because the belt can cause damage to the motor or other working components if it snaps completely inside the machine.


The cost to replace a belt in need of repair on a washing machine varies. Prices depend on the manufacturer of the washer, the model of the washer and how old of a washer unit you own. On Appliance Part Pros, washing machine belts range in price from around $5 to around $20 and on Amazon, they range in price from around $6 to around $20, so the average cost to repair the belt on a washing machine is around $12 or $13.


So, that's why I fix things myself. Usually a half an hour or so spent on Google will tell you what's wrong with whatever it is you're trying to fix. In my case it was a very old Bosch washing machine that wouldn't spin.


The problem apparently could have been a loose or broken belt (the belt that goes around the drum to make it spin), a problem with the door, or it could be worn brushes in the motor. Had no idea where or what they are so I Googled again.


As it turns out I discovered my belt was fine, the door was O.K., but when I jiggled the brush that goes into the motor (you don't need to know or care about that) the machine started working. Then it would stop a day or so later. This led me to believe the problem with my machine is a worn brush in the motor. A quick trip to the parts store and my washing machine will be fixed. For now it works on and off.


But while I was taking my machine apart, I thought I'd show you a little trick that will work with just about any belt on any machinery. If you've ever tried to get a belt on something that was really tight you know it's almost impossible to stretch it into place.


With the back of my washing machine off I could get a look at the guts. This is the belt that turns the drum. There would be a similar belt on a dryer and a bunch of other doo daddy machinery in the world.


And then down to the pin, that's attached to the motor. It's not called a pin, I have no idea what it's actually called but it's the thing that the machine actually spins, which in turn turns the belt, which in turn spins the wheel, which in turn spins the drum.


And there you have it. I'm sure you have no idea how you managed to get along in life without knowing how to properly change a belt on various pieces of machinery. I for one wonder how you've done it. But now you are blessed with the information which should make you feel secure. You know that when a belt breaks or comes loose and others are in a state of panic, calling 911, screaming, crying and trying to overthrow the government, YOU will be able to step up and fix it.


A leader and partner of the largest white goods' manufacturers, Hutchinson Belt Drive Systems produces more than 450 lines of ribbed belts,hereby covering 98% of the installed base of washing machines and clothes dryers.


Washing machine parts work hard to rinse, wash, spin and drain. But what is really going on inside a washing machine and what are the parts that make it all happen? Most washing machines work in similar ways and share similar parts. Understanding the parts of a washing machine and what they do will help you up your laundry game and make troubleshooting easier if something goes wrong, like experiencing a leak. Read on to learn more about the parts that drive your washing machine and the role they play in the cleaning process.


Most washing machines have an inner and outer tub. The inner tub is called a wash basket in top load washers and a drum in front load washers. The outer tub remains stationary and holds the wash basket or drum, catching the wash water so it can be drained out. The wash basket or drum is the part of the washer that holds the clothes and rotates to wash them. They can be plastic, porcelain or stainless steel.


The drain hose exits the washing machine toward the bottom and travels up to the nearby sink or standpipe. It drains the water from the washing machine and is usually made of corrugated plastic. Drain hoses are largely universal and come in widths from 1 to 1.25 inches in diameter. 041b061a72


About

Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page